Hacks and Fixes
These hacks and fixes were discussed in an August 2021 library telescope webinar. View a YouTube recording of the webinar at https://youtu.be/bx_6KxiLKCs
Hacks - Except 3D Files
-
Powerpoint Presentation on Hacks and Fixes
Download a PDF of the Powerpoint Presentation given on Hacks and Fixes.
(287 Hits) -
Telescope Modification Instructions (Baseline)
Download instructions to modify the Orion Starblast Telescope.
(1271 Hits) -
Bizcard Decal for Library Telescope
Download a decal which can be added to the library telescope so that patrons can quickly access training on the LibraryTelescope.org website.
(236 Hits) -
Telescope Signs and Decals
Download these ideas provided by the Stillwater Stargazers in Ohio.
(292 Hits) -
Adding an Auxiliary Case to the RDF
Download the alternate instructions to solder connections for the Red Dot Finder. The alternate approach appears more reliable than other approaches.
(314 Hits) -
Alternate Moon Map for the Telescope
(433 Hits) -
Alternate Constellation Guide
Use this guide to the constellations as an alternate to the Audubon Constellation Guide, courtesy of the Arkansas Natural Sky Association.
(609 Hits)
Hacks - 3D Files
-
3D File - Saddle Finder
Use your 3d printer to replace your red dot finder with this simple, saddle shaped finder that is easy to use and requires no batteries.
(251 Hits) -
3D File - Tube Finder
Use your 3D printer to replace your red dot finder with this simple, tube shaped finder that is easy to use and requires no batteries.
(330 Hits) -
3D File - Finder Scope Screw
Use your 3d printer to replace a missing screw at the base of the view finder.
(238 Hits) -
3D File - Eyepiece Cap
Use your 3d printer to replace your missing Celestron ZOOM eyepiece cap.
(239 Hits) -
3D File - Eye Guard Alternative 1
Use your 3D printer to print this alternative eyeguard.
-
3D File - Eye Guard Alternate 2
Use your 3D printer to print the alternative eye guard.
-
3D File - Eyeguard Alternative 3
Use your 3D printer to print the alternative eye guard. Use TPU filament to get the rubbery feel.
(441 Hits) -
3D File - Visual Back (Revised 9/7/2021)
The plastic piece on your focuser where the ZOOM eyepiece is inserted can sometimes crack or break. Use your 3D printer to print this replacement. This 3D design was revised on 9/7/2021 for a better fit.
(234 Hits) -
3D File - Hex Nut Knob
Do want a nut on the bottom of your telescope that can be hand-tightened? Use a 3D printer to print a replacement.
(223 Hits) -
3D File - Hex Nut Lock
Do want a nut on the bottom of your telescope that can be locked with screws? Use a 3D printer to print a replacement.
(244 Hits)